Advertisement
7179.803/804/805 Top Mount
FINISHED WALL
OR SPLASHBACK
5/8" (16mm)
2" (51mm)
4" (102mm)
OPTIONAL
7-7/8"
(200mm)
8-1/8"
(206mm)
3-1/2"
(89mm)
DIA.
7179.805
5 HOLE
1-1/2" (38mm)
9-3/4"
RAD. TYP.
(248mm)
16-1/2"
(419mm)
1/2"
(838mm)
(13mm)
SEALING
COMPOUND
9-1/8"
(232mm)
5-3/4
"
(146mm)
1-1/2" O.D. TAILPIECE
NOTES:
*
TEMPLATE PROVIDED WITH MOUNTING KIT 791326-100 FOR
EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK
COUNTERTOP CUTOUT VARIATIONS.
FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED
AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
4" (102mm)
4" (102mm)
4" (102mm)
C/L
1-1/2" (38mm)
DIA. HOLES TYP.
2-1/8"
(54mm)
7179.804
4 HOLE
(559mm)
*
11-1/8"
CUTOUT NOTE
(282mm)
33"
COUNTERTOP
(BY OTHERS)
6"
(152mm)
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
FINISHED FLOOR
NOTES:
*
TOP MOUNT: COUNTERTOP CUTOUT 806 x 527mm WITH 25mm
RADIUS (31-3/4 X 20-3/4 WITH 1" RAD.) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
22"
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
Undercounter Mount
FINISHED WALL
OR SPLASHBACK
2" (51mm)
OPTIONAL
7-7/8"
(200mm)
8-1/8"
(206mm)
3-1/2"
(89mm)
DIA.
1-1/2" (38mm)
RAD. TYP.
SEALING
COMPOUND
9-1/2"
(241mm)
5-3/4"
(146mm)
1-1/2" O.D. TAILPIECE
G24
SILHOUETTE™ 33"
DUAL LEVEL SINK
4" (102mm)
4" (102mm)
C/L
4" (102mm)
5/8" (16mm)
4" (102mm)
7179.805
5 HOLE
9-3/4"
11-1/8"
(248mm)
(282mm)
*
CUTOUT
16-1/2"
NOTE
(419mm)
33"
(838mm)
COUNTERTOP
(BY OTHERS)
FINISHED FLOOR
AMERICAST
®
1-1/2" (38mm)
DIA. HOLES TYP.
2-1/8"
(54mm)
7179.804
4 HOLE
22"
(559mm)
MOUNTING CLIP
(SEE DETAIL)
DETAIL OF MOUNTING CLIP
(KIT No.791004-100)
BRASS
1/2 "
INSERT
(13mm)
MIN.
SINK
CLIP
MACH.
SCREW
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
6-1/2"
(165mm)
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
Revised 2/08
Advertisement
