Motion Picture
Reducing flickering and horizontal stripes on images ([Synchro Scan])
Applicable modes:
•
This function is available when [Exposure Mode] is set to either [S] or [M] in Creative Video Mode.
1
Select the menu. (P28)
>
MENU
2
Select [ON] with 3/4, and then press [MENU/SET].
3
Select Shutter Speed with 2/1, and then press [MENU/SET].
•
You can fine-adjust the shutter speed.
•
Adjust the shutter speed while looking at the screen so that flickering and horizontal
stripes will be minimized.
•
If you press and hold 2/1, the shutter speed will be adjusted faster.
•
You can also adjust the shutter speed setting on the recording screen in increments finer
than the normal adjustment method.
∫ Canceling [Synchro Scan]
Select the [OFF] setting in step
Recording in Slow or Fast Motion ([Variable Frame Rate])
Applicable modes:
•
This function is available only when the camera is set to Creative Video Mode.
•
Recording with a variable frame rate is possible with the following settings in [Rec Format] and [Rec Quality].
[AVCHD]
[MP4 (LPCM)]/
[MOV]
¢ When [Rec Format] is set to [MP4], recording with a variable frame rate is not possible.
•
Auto Focus does not work.
•
Audio is not recorded.
1
Select the menu. (P28)
>
MENU
2
Press 3/4 to select an item and then press [MENU/SET].
•
Items available for recording with a variable frame rate are
indicated as [VFR available] on the screen.
3
Select [Variable Frame Rate] with 3/4, and then
press [MENU/SET].
4
Select [ON] with 3/4, and then press [MENU/SET].
5
Press 2/1 to select the frame rate you will record the item with.
•
You can select a value between [2 fps] and [96 fps].
6
Press [MENU/SET].
•
Exit the menu after it is set.
66
VQT5H68 (ENG)
[Motion Picture] > [Synchro Scan]
2
.
When [System Frequency] is set to [59.94 Hz (NTSC)]
•
[FHD/24M/30p]/[FHD/24M/24p]
When [System Frequency] is set to [50.00 Hz (PAL)]
•
[FHD/24M/25p]
When [System Frequency] is set to [59.94 Hz (NTSC)]
•
[FHD/100M/30p]/[FHD/100M/24p]
When [System Frequency] is set to [50.00 Hz (PAL)]
•
[FHD/100M/25p]
When [System Frequency] is set to [24.00 Hz (CINEMA)]
•
[FHD/100M/24p]
[Motion Picture] > [Rec Quality]