Table of Contents
Advertisement
Motion Action Setup (1)
This screen allows you to set up the actions the multiplexer will take
when there is a motion alarm condition.
• Buzzer :
When set to On, the multiplexer's internal buzzer will sound
during a motion alarm condition.
• Alarm Screen :
one defined in the Alarm Screen Format menu during a motion alarm
condition.
• Network Relay :
information to an external relay box via the network during a motion
alarm condition.
• Message Latch :
when a motion alarm condition occurs. It remains on the screen until
it is cleared.
< Figure 18 > Motion Action Setup (1) screen.
When set to On, the screen display will change to the
When set to On, the multiplexer sends the alarm
When set to On, an "M" displays on the screen
23
Advertisement
Table of Contents
