Options During a Call
Your phone provides a number of control functions that you
can use during a call.
Adjusting the Call Volume
During a call, to adjust the volume, use the Volume keys on
the left side of the phone.
Press the Up volume key to increase the volume level
and press the Down volume key to decrease the
volume level.
– or –
Quickly add more volume to the incoming audio by
tapping
Extra volume
in the check box.
From the Home screen, you can also adjust the ringer volume
using these same keys.
.A check mark appears
In-Call Options
During an active call there are several functions available by
tapping a corresponding onscreen button.
•
Add call: displays the dialer so you can call another person.
•
Keypad: displays the onscreen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
•
End call: terminates the call.
•
Speaker: routes the phone's audio through either the speaker or
through the earpiece.
–
Tap Speaker to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap Speaker again to use the phone's earpiece (see "Using
the Speakerphone During an Active Call" on page 58). The
green line will disappear when Speaker is not activated.
•
Mute/Unmute turn the onboard microphone either on or off.
–
Tap Mute during a call to mute the microphone. A green line
will appear under the Mute button.
–
Tap Mute again to unmute the microphone. The green line will
disappear when Mute is not activated.
Call Functions
56