Miele KM 6350 Operating And Installation Instructions page 53

Problem
The sensors are
over-sensitive or do not
react at all.
FE flashes alternately
with numbers in the
timer display.
FE 44
FE 47
FE 48
Other fault messages
FE..
Possible cause
The sensitivity level of
the sensors has
changed.
The overheating
protection mechanism
has triggered.
The fan is either
blocked or faulty.
A fault with the
electronics has
occurred.
Problem solving guide
Remedy
Make sure that there is no
direct light (from the sun or
from an artificial source)
falling onto the hob and that
the surrounding area is not
too dark.
Make sure that there is
nothing covering the sensors
or the hob. Take any pans off
the hob and wipe away any
food deposits.
Interrupt the power supply to
the hob for approx. 1 minute.
If this does not solve the
problem, please call the
Miele Service department.
See "Overheating protection".
Make sure it has not been
blocked by something like a
fork. Remove the cause of
the blockage. If the fault
message appears again, call
the Miele Service
Department.
Interrupt the power supply to
the hob for approx. 1 minute.
If the problem persists after
reconnecting the appliance
to the power supply, please
contact the Miele Service
department.
53