Gigaset SL400A Manual page 68

Activating/deactivating Bluetooth
mode
¢ ¢
v ò
Activation
§Change§
Press to activate or deactivate Blue-
tooth mode (³ = activated).
In idle state, the ò icon on the handset
shows that Bluetooth mode is activated
¢
( page 3).
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be no
more than 10 m.
Please note
u
If you register a headset, any headset
that is already registered will be over-
written.
u
If you would like to use a headset with
your handset that is already regis-
tered to another device (e.g., to a
mobile phone), please deactivate this
connection before you start the regis-
tration process.
ò
¢ ¢
v
Search for Headset / Search
Data Device
The search can take up to 30 seconds.
Once the device has been found, its name is
shown on the display.
§Options§
Press the display key.
Trust Device
Select and press
~
Enter the PIN for the Bluetooth
device you want to register and
§OK§
press
The device is saved in the list of known
devices.
§OK§
.
.
Using Bluetooth devices
Cancelling/repeating current search
To cancel search:
§Cancel§
Press the display key.
Repeat search if necessary:
§Options§
Press the display key.
Repeat Search
Select and press
Editing the list of known (trusted)
devices
Open list
ò
¢ ¢
v
Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
If a device is connected, the corresponding
icon is shown in the header of the display
ò
instead of .
Viewing entries
¢
s (select entry)
Open list
§Options§
Press the display key.
View Entry
Select and press
Device name and address are
displayed.
Go back with
De-registering Bluetooth devices
¢
s (select entry)
Open list
§Options§
Press the display key.
Delete Entry
Select and press
Please note
If you de-register an activated Bluetooth
device, it may try to reconnect as an
"unregistered device".
§OK§
.
§OK§
.
§OK§
.
§OK§
.
67