Download Print this page
American Standard Silhouette 25 Specification Sheet
American Standard Silhouette 25 Specification Sheet

American Standard Silhouette 25 Specification Sheet

25" single bowl kitchen sink

Advertisement

Quick Links

SILHOUETTE™ 25" SINGLE BOWL KITCHEN SINK
• Americast
brand engineered material
®
• Single bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain finish
• Tile edge installation
• Silicone sealant supplied
• Available in 1, 3 or 4 faucet hole configuration
• Customized hole punchings available
(see page G56)
Tile Edge:
7172.011 Center hole only
7172.813 3 hole
7172.814 4 hole
Nominal Dimensions:
635 x 559 x 241mm
(25" x 22" x 9-1/2")
Bowl sizes:
552mm (21-3/4") wide
476mm (18-3/4") front to back
229mm (9") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
© 2008 AS America Inc.
SINGLE BOWL SINK
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
To Be Specified:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, Color:
❏ Trap:
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander for Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
❏ Bottom Sink Rack: 7404.100, Color:
* See faucet section for available models
G35
SILHOUETTE™ 25"
AMERICAST
Revised 2/08
®

Advertisement

loading

Summary of Contents for American Standard Silhouette 25

  • Page 1 SILHOUETTE™ 25" SINGLE BOWL KITCHEN SINK • Americast brand engineered material ® • Single bowl design • Titanium enamel - heat resistant up to 1000° • Acid-resisting glossy porcelain finish • Tile edge installation • Silicone sealant supplied • Available in 1, 3 or 4 faucet hole configuration •...
  • Page 2 FINISHED WALL OR SPLASHBACK OPTIONAL 7-7/8" (200mm) TILED COUNTERTOP (BY OTHERS) 1-1/2" O.D. TAILPIECE NOTES: COUNTERTOP CUTOUT 603mm x 527mm WITH 25mm RADIUS (23-3/4 X 20-3/4 WITH 1” RADIUS) AT CORNERS. ■ ON FOUR HOLE VERSIONS, SPACING BETWEEN FAR RIGHT HOLES IS 3".

This manual is also suitable for:

Silhouette 7172.011Silhouette 7172.813Silhouette 7172.814