Sony KP-51WS510 Service Manual page 213

Using the Features
z
To scan rapidly through the
channels, press and hold down
CH+ or CH–.
38
Button Description
qd POWER Turn on and off the projection TV and other audio/video
buttons
equipment you have programmed into the remote control.
(GREEN) For instructions, see "Programming the Remote Control"
on page 71.
qf FUNCTION
Select the equipment (TV, SAT/CABLE) that you want to
buttons operate. The indicator lights up momentarily when pushed
to show which device the remote control is operating.
qg TV/VIDEO Cycles through the video equipment connected to your
projection TV's video inputs: TV, VIDEO 1, VIDEO 2,
VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7.
qh 0 – 9 and Press 0 - 9 to select a channel, the channel changes after 2
ENTER seconds. Press ENTER to select immediately.
qj
Turns on/off Twin View. For details, see "Using Twin
View™" on page 44.
GUIDE
Displays the program guide of your satellite.
qk MENU Press to display the projection TV on-screen menu. Press
again to exit from the menu.
ql CH +/– Scan through channels.
w; DRC/ Press repeatedly to step through the available high-
CINEMOTION resolution picture modes: Interlaced, Progressive and
CineMotion. For details, see "Using the Video Menu" on
page 52.
wa WIDE MODE Press to step through the wide screen modes: Wide Zoom,
Normal, Full and Zoom. For details, see "Using Wide
Mode" on page 50.