Dial Pointer Installation - Sony CFD-V3 Service Manual

CFD-V3/V7/V7L
SECTION 4

DIAL POINTER INSTALLATION

Note : Follow the installation procedure in the numerical order given.
1 Align the pointer with the groove of "cabinet (front) sub ASSY" and insert it as shown in the illustration.
2 Align knob (TU) with "cabinet (front) sub ASSY" and fasten the screw.
Cabinet (front) sub ASSY
1 Pointer
knob (Tu)
2 Screw (+BVTP 2.6 8)
3 Turn the knob (TU) fully in the direction of the allow as shown in the illustration.
4 Turn the tuning capacitor gear fully in the direction of the allow as shown in the illustration.
5 Fasten the "cabinet (front) sub ASSY" and cabinet (rear) with the screws.
5
4 Tuning capacitor gear Cabinet (rear)
3 Tuning knob
9