External Speaker Out; Tidying Cables - LG 32LP645H Quick Reference Manual

cAuTiON
Disconnect the power before moving or installing
y y
the TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it
y y
may fall and result in severe injury.
Use an authorized LG wall mount and contact the
local dealer or qualified personnel.
Do not over tighten the screws as this may cause
y y
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
y y
VESA standard. Any damages or injuries by misuse
or using an improper accessory are not covered by
the warranty.
NOTE
The wall mount bracket is optional. You can obtain
y y
additional accessories from your local dealer.
Use the screws that are listed in the VESA
y y
standard screw specifications.
The wall mount kit includes an installation manual
y y
and necessary parts.
The length of screws may differ depending on the
y y
wall mount. Make sure to use the proper length.
For more information, refer to the manual supplied
y y
with the wall mount.

External speaker out

Connect the external speaker.
/ DVI IN
2
1
RESET UPDATE
SPEAKER OUT
LINE OUT
PTC SERVICE
GAME CONTROL
GAME CONTROL GAME CONTROL GAME CONTROL
(SERVICE ONLY)
/ M.P.I
RGB IN (PC)
RJP
RS-232C IN
TV-LINK (CONTROL & SERVICE)
CFG
NOTE
Make sure that the external speaker should be
y y
connected with TV under power-off state.
Use external speaker with SE type (3 pin).
y y
ANTENNA/
CABLE IN
OPTICAL
AUDIO OUT
AV IN
AUDIO IN (RGB DVI)
GND
L
R
GND
ASSEMBLiNG ANd PREPARiNG

Tidying cables

1 Install the power cord holder and power cord. It will
help prevent the power cable from being removed
by accident.
2 Gather and bind the cables with the cable holder.
For 32/37/39/42LP645H,
32/37/39/42LP620H, 32/42LP621H
Power cord Holder
and Screw
For 47/55/60LP645H
Power cord Holder
and Screw
cAuTiON
Do not move the TV by holding the cable holder
y y
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
17
cable Holder
cable Holder