Tripp Lite SR42UBDPWD Brochure & Specs

42U SmartRack DEEP and WIDE Premium
Enclosure (includes doors and side panels)
MODEL NUMBER: SR42UBDPWD
Description
A DEEP and WIDE version of our standard 42U SmartRack. This enclosure is 1200mm deep (48") compared to
the standard 1070mm deep (42"). This extra depth allows for high density equipment installations. It allows extra
space for moving the cable management back as well as providing space for mounted equipment that has
hot-swap, removable power supplies out the back of the enclosure. It is also 750mm wide (30") compared to the
standard 600mm wide (24"). This extra width allows for high density equipment installations. It allows cable
management and PDU mounting off to the sides of the rack in order to keep these items out of the airflow for
proper cooling. All features from the standard SmartRacks carry over to these wide racks to allow cross usage of
accessories.
Features
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and
convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming
measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting
slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable
managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 42 inches/1070mm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
Front door is locking, reversible and removable.
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer
to a wall.
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4
1 / 4
Highlights
48" (1200mm) depth for extra
space need for mounting deep
equipment
30" (750mm) width for optimizing
airflow through cabinet
Ships fully assembled
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors; Locking,
removable side panels keyed
alike with doors
Pre-installed casters and leveling
feet; Rolls through standard 7
foot doorway
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Package Includes
SR42UBDPWD Rack Enclosure
(4) Side panels
(4) Side panel locks
(2) Door & side panel keys
(50) M6 screws
(50) M6 cage nuts
(50) M6 washers
(1) Allen Wrench
Owner's Manual