Sony HT-CT260H Operating Instructions Manual page 32

Sound Bar (SA-CT260H)
Amplifier section
POWER OUTPUT (rated)
Front L + Front R: 50 W + 50 W
(at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R: 85 W (per channel at
4 ohms, 1 kHz)
Inputs
HDMI IN
ANALOG IN
OPTICAL IN
Output
HDMI TV OUT (ARC)
BLUETOOTH section
Communication system
BLUETOOTH Specification version
3.0
Output
BLUETOOTH Specification Power
Class 2
Maximum communication range
Line of sight approx. 10 m
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.4 (Audio Video Remote
Control Profile)
Supported Codecs
4)
SBC
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling
frequency 44.1 kHz)
1) The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software
application, etc.
32
GB
1)
2)
3)
2) BLUETOOTH standard profiles
indicate the purpose of BLUETOOTH
communication between devices.
3) Codec: Audio signal compression and
conversion format
4) Subband Codec
Front speaker unit
Speaker system
Full range speaker system,
Bass Reflex
Speaker unit
Woofer: 55 mm × 80 mm
cone type
Rated impedance
4 ohms
General
Power requirements
220 V - 240 V AC, 50/60 Hz
Power consumption
On: 32 W
"Control for HDMI" is off (Standby
mode): 0.5 W or less
BLUETOOTH Standby mode: 0.5 W
or less
Dimensions (approx.)
940 mm × 102 mm × 95 mm
(with stands)
940 mm × 90 mm × 100 mm
(without stands)
Mass (approx.)
2.2 kg
Subwoofer (SA-WCT260H)
POWER OUTPUT (reference)
130 W (per channel at 4 ohms,
100 Hz)
Speaker system
Subwoofer, Bass reflex
Speaker unit
130 mm cone type
Rated impedance
4 ohms
Power requirements
220 V - 240 V AC, 50/60 Hz
Power consumption
On: 30 W
Standby mode: 0.5 W or less