Mirror Mode - Targus USB 3.0 SUPERSPEED Quick Start Manual

Windows XP/Vista Setup
®
®
NOTE: DO NOT CONNECT THE DOCKING STATION PRIOR TO INSTALLING THE DISPLAYLINK DRIVER.
1) Intstall the included Driver CD.
2) Double click on Setup.exe.
Windows 7 Setup
®
1) Connect the Docking Station to your laptop.
2) Windows will start installing the DisplayLink
Driver automatically.
NOTE: If the driver installation does not automatically start,
disconnect the docking station from your laptop, insert the
Driver CD, and click on the Setup.exe file.
Docking Station Diagram
USB to
USB 3.0 Port
DVI-I
Laptop Port
AC Power
Adapter
USB 3.0 Port
Lock Slot
Audio In Audio Out
3) Follow the on-screen instructions
until the installation is complete.
4) Connect the Docking Station and
peripherals.
3) Follow the on-screen instructions
until the installation is complete.
4) Connect all peripheral devices.
TM
USB 2.0 Ports
HDMI
Gigabit DVI to VGA Adapter
Ethernet
USB 2.0 Port
HDMI to DVI-D Adapter
DisplayLink Manager Menu
TM
Menu Option
DisplayLink Manager
Opens the Screen Resolution window
Checks online if new drivers are available to download
Check for Updates
DisplayLink devices Shows a list of all connected DisplayLink devices
Audio Setup Opens the Audio Configuration window
Opens the Screen Resolution window
Video Setup
Shows a list of all available screen resolutions. Inferred Modes [ ]
Screen Resolution
are not available in mirror mode
Rotates the screen in clockwise or counter-clockwise directions
Screen Rotation
Extend Extends the Windows desktop onto this display
Sets this screen as the main display
Set as Main Monitor
Switches off the laptop display and use the DisplayLink
Notebook Monitor
display as the main screen (only works on PCs and when
Off
only one DisplayLink screen is connected)
Shows the same content on both screens (screen
Mirror
resolutions must be the same)
Turns off this DisplayLink display
Off
Select for improved video playback on DisplayLink
connected displays (only applicable for video; text may
Optimize for Video
appear less clear)
Adjusts the size of the Windows desktop to fit the
Fit to TV
connected TV (only works when one DisplayLink display is
connected and set in Extend Mode)
To Set the Display into
Extend Mode
1. Click on the DisplayLink icon .
2. Select Extend in Manager Menu.
The device is now extended in the direction
it was the last time the display was in this
mode. For more control, use the Extend
To submenu and select one of the options.
This puts the device into Extend Mode, and
places it to the Left/Right/Above/Below the
main monitor.
To Set the Display into

Mirror Mode

1. Click on the DisplayLink icon .
2. Select Mirror in Manager Menu.
The resolution, color depth and refresh
rate of the primary screen are replicated
on the monitorconnected to the docking
station.
Fit to TV Configuration
1. To configure Fit to TV, choose the option
from the DisplayLink Manager. The
following interface appears.
2. You will also see a red border on the
DisplayLink screen.
The red border shows the size of the new
WindowsDesktop. Use the "+" and "-"
controls to change the size of the red border
until it fits on the TV screen.
3. Once the red border is at the edges of
the TV screen, click "Apply" to resize the
Windows desktop.