Sony HCD-RG555 Service Manual

Mini hi-fi component system
Hide thumbs Also See for HCD-RG555:

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.0 2004. 04
• HCD-RG555 is the tuner, deck,
CD and amplifier section in
MHC-RG555.
Amplifier section
The following measured at AC 120, 127, 220, 240 V,
50/60 Hz
DIN power output (rated): 120 + 120 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
150 + 150 watts (6 ohms at
1 kHz, 10% THD)
Inputs
VIDEO/MD IN (phono jack):
voltage 450/250 mV,
impedance 47 kilohms
GAME INPUT AUDIO L/R (phono jacks):
voltage 250 mV,
impedance 47 kilohms
GAME INPUT VIDEO (phono jack):
1 Vp-p, 75 ohms
MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
PHONES (stereo mini jack):
accepts headphones of
8 ohms or more
VIDEO OUT (phono jack): max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
SPEAKER:
accepts impedance of 6 to
16 ohms
Sony Corporation
9-877-774-01
2004D04-1
Home Audio Company
© 2004. 04
Published by Sony Engineering Corporation
HCD-RG555
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Optical Pick-up Name
Tape Deck Model Name Using Similar Machanism
Section
Tape Transport Mechanism Type
SPECIFICATIONS
CD player section
System
Laser
Frequency response
Signal-to-noise ratio
Dynamic range
Tape deck section
Recording system
Frequency response
Tuner section
FM stereo, FM/AM superheterodyne tuner
MINI HI-FI COMPONENT SYSTEM
E Model
NEW
CDM74-F1BD81
KSM-215DCP/C2NP
NEW
CWM43RR-35
Compact disc and digital
audio system
Semiconductor laser
(λ=770 – 810 nm)
Emission duration:
continuous
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
4-track 2-channel, stereo
50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
– Continued on next page –
1

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-RG555

  • Page 1 HCD-RG555 SERVICE MANUAL E Model Ver 1.0 2004. 04 • HCD-RG555 is the tuner, deck, CD and amplifier section in MHC-RG555. Model Name Using Similar Mechanism CD Mechanism Type CDM74-F1BD81 Section Optical Pick-up Name KSM-215DCP/C2NP Tape Deck Model Name Using Similar Machanism...
  • Page 2 HCD-RG555 FM tuner section General Tuning range 87.5 – 108.0 MHz (50 kHz step) Power requirements Antenna FM lead antenna Saudi Arabian model: 120 – 127 V/220 V or Antenna terminals 75 ohms unbalanced 230 – 240 V AC, Intermediate frequency 10.7 MHz...
  • Page 3: Leakage Test

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 4 HCD-RG555 The release method of a CD disc tray LOCK function NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT There is a disc lock function for the disc theft prevention for a demonstration at a shop front in this machine.
  • Page 5: Table Of Contents

    HCD-RG555 TABLE OF CONTENTS 1. SERVICING NOTE 5-4. Block Diagram –Panel/Power Section– ......29 5-5. Circuit Boards Location ............ 30 1-1. Service Position-1 (AMP Board) ........6 5-6. Note for Printed Wiring Boards 1-2. Service Position-2 (BD81A Board) ........6 and Schematic Diagrams ..........
  • Page 6: Servicing Note

    HCD-RG555 SECTION 1 SERVICING NOTE 1-1. SERVICE POSITION-1 (AMP BOARD) To inspect the AMP board, turn both of the front panel and the CD mechanism deck so that the left side of the product faces down. CD mechanism deck front panel AMP board 1-2.
  • Page 7: General

    HCD-RG555 SECTION 2 GENERAL This section is extracted from instruction manual.
  • Page 8: Remote Control

    HCD-RG555...
  • Page 9: Disassembly

    HCD-RG555 SECTION 3 DISASSEMBLY Note : Disassemble the unit in the order as shown below. 3-1. CASE (TOP) (Page 10) 3-2. CD DOOR (Page 10) 3-3. FRONT PANEL SECTION (Page 11) 3-4. CD MECHANISM DECK 3-5. TAPE MECHANISM DECK, 3-6.
  • Page 10: Case (Top)

    HCD-RG555 Note : Follow the disassembly procedure in the numerical order given. 3-1. CASE (TOP) qd two screws (+BVTP 3 × 10) qh case (top) 7 two screws (case 3 TP2) qs case (side-L) 9 screw (+BVTP 3 × 10)
  • Page 11: Front Panel Section

    HCD-RG555 3-3. FRONT PANEL SECTION 4 screw (+BVTP 3 × 8) qa CN304 1 CN805 3 CN823 8 screw (+BVTP 3 × 10) 5 screw (+BVTP 3 × 8) qs CN102 7 screw (+BVTP 3 × 10) qd CN103 0 CN309...
  • Page 12: Tape Mechanism Deck, Mic Jack Board

    HCD-RG555 3-5. TAPE MECHANISM DECK, MIC JACK BOARD 3 tape mechanism deck 2 seven screws 1 connector (+BVTP 2.6 × 8) jack bracket 4 two screws (+BVTP 2.6 × 8) 6 MIC JACK board 5 two screws (+BVTP 3 × 10) 3-6.
  • Page 13: Back Panel Section, Sub Trans Board

    HCD-RG555 3-7. BACK PANEL SECTION, SUB TRANS BOARD qa back panel section 0 SUB TRANS board 3 CN901 9 two screws (+BVTP 3 × 10) 7 three screws (+BVTP 3 × 10) 2 CN906 1 CN904 6 two screws 5 CN308 (+BVTP 3 ×...
  • Page 14: Main Board

    HCD-RG555 3-9. MAIN BOARD 4 MAIN board 1 CN907 MAIN board 3 CN441 2 two screws (+BVTP 3 × 8) 3-10. AMP BOARD 2 two screws (+BVTT 4 × 8) 3 screw 4 screw (+BVTP 3 × 14) (+BVIT 3 × 8R )
  • Page 15: Bd81A Board

    HCD-RG555 3-11. BD81A BOARD 3 screw (+BVTP 2.6 × 8 ) 4 gap tube 1 CN202 6 BD81A board 2 CN101 Remove soldering from the four points. 3-12. CONNECT BOARD 1 CN871 2 two screws (+BVTP 2.6 × 8 )
  • Page 16: Driver Board, Sw Board

    HCD-RG555 3-13. DRIVER BOARD, SW BOARD 1 two screws (+BTTP (M2.6)) 3 CN703 4 DRIVER board 5 screw (+BTTP (M2.6)) 6 SW board 2 CN702 3-14. OPTICAL PICK-UP 1 floating screw (+PTPWH M2.6) 2 h older (213) ASSY 7 two insulators...
  • Page 17: Sensor Board

    HCD-RG555 3-15. SENSOR BOARD 1 floating screw (+PTPWH M2.6) 2 t ray 8 s crew (+BTTP (M2.6)) 3 b elt (table) 0 SENSOR board 4 floating screw (+PTPWH M2.6) 5 p ulley (table) 6 floating screw 9 CN731 (+PTPWH M2.6) 7 g ear (geneva) 3-16.
  • Page 18: Motor (Ld) Board

    HCD-RG555 3-17. MOTOR (LD) BOARD 2 two screws (+BTTP (M2.6)) 4 Remove the two solderings of motor. 3 MOTOR (LD) board 5 l oading motor assy (M751) 1 b elt (loading)
  • Page 19: Test Mode

    HCD-RG555 SECTION 4 TEST MODE [Change-over of AM Tuner Step between 9 kHz and 2) Error display 10 kHz] Disc error • A step of AM channels can be changed over between 9 kHz and Display Error 10 kHz. E00D01022...
  • Page 20 HCD-RG555 [PANEL Test Mode] [MC Test Mode] • All fluorecent segments and LEDs are tested. • This mode is used to test the function of the equalizer. • Keyboard check. Procedure: 1. Press ?/1 button to turn the set ON.
  • Page 21 HCD-RG555 [CD Repeat 5 Times Limit Release Mode] Procedure: Press ?/1 button to turn the set ON. Select the function “CD”. Press three buttons x , CD and ENTER simultaneously. The message “LIMIT OFF” is displayed. Press ?/1 button the set OFF.
  • Page 22: Diagrams

    HCD-RG555 SECTION 5 DIAGRAMS 5-1. IC PIN DESCRIPTIONS • IC101 CXD3059AR (RF AMP) (BD81A BOARD) Pin No. Pin Name Pin Description MIRR Mirror signal input/output Not used in this set. (Open) DFCT Defect signal input/output Not used in this set. (Open) Focus OK signal input/output Not used in this set.
  • Page 23 HCD-RG555 Pin No. Pin Name Pin Description FILO Master PLL (slave=digital PLL) filter signal output FILI Master PLL filter signal input Master PLL charge pump signal output AVDD5 — Analog power supply pin (+3.3 V) DDVROUT DC/DC converter signal output...
  • Page 24 HCD-RG555 Pin No. Pin Name Pin Description DATA Serial data signal input — Internal digital ground pin XLAT Latch signal input The serial data is latched at the falling edge CLOCK Serial data transfer clock signal input — Internal digital power supply pin (+3.3 V)
  • Page 25 HCD-RG555 • IC601 LC876996A-53H2-E (SYSTEM CONTROLLER) (PANEL BOARD) Pin No. Pin Name Pin Description O-MP3 CS CS signal output to CD digital processor O-MP3 LP MOTER LP signal output to CD digital processor and motor signal output I-MP3 ACK SOL-B...
  • Page 26 HCD-RG555 Pin No. Pin Name Pin Description STREAM-LED4/MOTOR Illumination LED control signal output STREAM-LED3/MP3-STB Illumination LED control signal output STREAM-LED2 Illumination LED control signal output STREAM-LED1 Illumination LED control signal output I-LC72121 DI Data signal input from tuner O-LC72121 CE...
  • Page 27: Block Diagram -Cd Section

    HCD-RG555 5-2. BLOCK DIAGRAM — CD SECTION — OPTICAL PICK-UP BLOCK (KSM-215DCP) DETECTOR DIGITAL RF AMP +1.7V SIGNAL PROCESSOR IC101 +3.3V IC301 +1.5V REG PCMDI SDO0 +3.3V IC303 LRCKI LRCKIA LRCK SFSY/LRCKIB VDDM PCMD SDIO BCKIA LD MOTOR DRIVER BCKI...
  • Page 28: Block Diagram -Main Section

    HCD-RG555 5-3. BLOCK DIAGRAM — MAIN SECTION — SOUND PROCESSOR IC101 BUFFER JK441 IC102 MP3-STB RY441 POWER AMP CD-L 1 CDL VOUT1 SECTION IC441 CD-R R-CH (Page 27) VOUT2 R-CH SPEAKER OVERLOAD DET MUTE MUTE Q306 Q103 Q481,482 MUTE R-CH...
  • Page 29: Block Diagram -Panel/Power Section

    HCD-RG555 5-4. BLOCK DIAGRAM — PANEL/POWER SECTION — SYSTEM CONTROLLER IC601(2/2) D401 S641-S650,SW601 PT901 POWER TRANSFORMER FUNCTION STREM-LED1 DRIVER 25 KEY3 VH– Q610 F908 LED610 S601-S608,S610-S612 S901 FUNCTION VOLTAGE 27 KEY1 D402 SELECTOR F904 STREM-LED3 DRIVER LIVE S621-S630 Q612 220V...
  • Page 30: Circuit Boards Location

    HCD-RG555 5-5. CIRCUIT BOARDS LOCATION SENSOR board BD81A board SW board MOTOR (TB) board MOTOR (LD) board DRIVER board CONNECT board TRANS board AMP board VIDEO OUT board SUB TRANS board REM board PANEL board MAIN board 6 STREAM LED board...
  • Page 31: Note For Printed Wiring Boards And Schematic Diagrams

    HCD-RG555 5-6. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 5-7. WAVEFORMS Note on Printed Wiring Board: Note on Schematic Diagram: – PANEL Board – • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF •...
  • Page 32: Printed Wiring Board -Cd Mechanism Section (1/2)

    HCD-RG555 5-8. PRINTED WIRING BOARD — CD MECHANISM SECTION (1/2) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. M101 IC303 C305 C303 S101 R313 C257 R419 C315 R403 C316 C306 R352 M102 C313 R302...
  • Page 33: Schematic Diagram -Cd Mechanism Section (1/2)

    HCD-RG555 5-9. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (1/2) — • Refer to page 47 for IC Block Diagrams. CN101 R307 TP423 C125 TP304 C142 TP10 C307 C134 TP11 TP424 IC B/D C151 TP12 R143 TP13 TP14 C124 C141 TP102...
  • Page 34: Printed Wiring Boards -Cd Mechanism Section (2/2)

    HCD-RG555 5-10. PRINTED WIRING BOARDS — CD MECHANISM SECTION (2/2) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. MAIN BOARD CN301 (Page 38) S751 CN751 (LEVER SW) • Semiconductor Location Ref. No. Location D701...
  • Page 35: Schematic Diagram -Cd Mechanism Section (2/2)

    HCD-RG555 5-11. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (2/2) — • Refer to page 48 for IC Block Diagrams. IC701 IC B/D R702 R701 D701 C715 CN704 C751 CN721 M751 IC712 IC B/D R712 R713 CN705 C752 CN751 D711 R711...
  • Page 36: Schematic Diagram -Main Section (1/2)

    HCD-RG555 5-12. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 49 for IC Block Diagram. R143 CN309 JK101 Q372 R144 R151 C172 R146 C171 R145 Q101 R391 R386 (Page 43) R385 R216 R217 R219 R152 R154 R153...
  • Page 37: Schematic Diagram -Main Section (2/2)

    HCD-RG555 5-13. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 49 for IC Block Diagrams. (Page 36) Q362 C270 R361 R362 R364 Q361 R363 R275 D316 R274 Q315 Q314 R323 C252 R253 R321 C312 R324 R322 R262...
  • Page 38: Printed Wiring Board -Main Section

    HCD-RG555 5-14. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. (Page 42) (Page 42) (Page 34) JW146 CN101 • Semiconductor JW108 Q313 Location R280 Ref. No. Location C376...
  • Page 39: Printed Wiring Boards -Panel Section

    HCD-RG555 5-15. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. IC610 (Page 42) (Page 38) SV-HCDRG555-PANEL Administrator (Page 42) (Page 42) • Semiconductor Location Ref. No. Location Ref. No.
  • Page 40: Schematic Diagram -Panel Section (1/2)

    HCD-RG555 5-16. SCHEMATIC DIAGRAM — PANEL SECTION (1/2) — • Refer to page 49 for IC Block Diagram. CN605 R704 R706 R708 R700 JW660 R702 JW659 (Page 43) Q610 Q612 Q611 Q614 Q615 Q613 R698 CN604 JW674 JW718 (Page 43)
  • Page 41: Schematic Diagram -Panel Section (2/2)

    HCD-RG555 5-17. SCHEMATIC DIAGRAM — PANEL SECTION (2/2) — • Refer to page 31 for Waveforms. FL601 CN603 JW812 R785 R783 R782 C623 R781 C622 R780 R779 R710 R712 R778 LED601 (Page 43) R719 C620 C621 R777 R776 R772 C642...
  • Page 42: Printed Wiring Boards -Jack Section

    HCD-RG555 5-18. PRINTED WIRING BOARDS — JACK SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. (Page 39) (Page 38) (Page 39) (Page 38) (Page 39) (Page 38) (Page 32) J803 LP802 • Semiconductor Location Ref.
  • Page 43: Schematic Diagram -Jack Section

    HCD-RG555 5-19. SCHEMATIC DIAGRAM — JACK SECTION — CN874 S660 C830 C831 SW601 CN804 J801 JW876 FB871 (Page 36) JW875 CN871 R673 (Page 36) JW878 JW877 FB872 CN873 C832 JW871 W803 JW872 CN606 CN607 JW873 JW874 (Page 41) (Page 33)
  • Page 44: Printed Wiring Board -Power Amp Section

    HCD-RG555 5-20. PRINTED WIRING BOARD — POWER AMP SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D401 D402 D441 D442 D443 D444 D445 D446 D481 D482 IC441...
  • Page 45: Printed Wiring Boards -Transformer Section

    HCD-RG555 5-21. PRINTED WIRING BOARDS — TRANSFORMER SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. LP903 CN904 D904 D905 JW911 CN906 CN902 D902 D903 D901 C911 JW912 C906 Q902 R908 D908 C909 C908...
  • Page 46: Schematic Diagram -Power Section

    HCD-RG555 5-22. SCHEMATIC DIAGRAM — POWER SECTION — C461 R467 R496 D445 L441 R449 RY441 C441 R474 R411 R441 R461 JK441 Q491 JW441 R462 IC441(1/2) R466 R465 C445 JW403 L442 C451 R455 R472 R473 TH441 D443 R485 C453 Q483 R407...
  • Page 47: Ic Block Diagrams

    HCD-RG555 5-23. IC BLOCK DIAGRAMS IC301 TC94A34FG-002 (BD81A BOARD) LRCKIA BCKIA SDI0 BUCK LRCKO BCKO AD12 SDO0 AD11 VDDM VDDT SRMSTB MIACK VDDT MICK AD10 MIDIO MILP Switch MICS STANBY RESET VDDP Timing Generator...
  • Page 48 HCD-RG555 IC251 BA5947FM (BD81A BOARD) CH1PUTF CH4OUTR CH1OUTR CH4OUTF CH2OUTF CH3OUTF PIN26 6.5k CH2OUTR CH3OUTR Vref POWVCC POWVCC (ch3, 4) (ch1, 2) 50k 50k 50k 50k MUTE CNF4 50k 50k Vref PREGND CH3RIN CH2RIN CH3FIN CH2FIN 100k CH1RIN CH4IN PIN3...
  • Page 49 HCD-RG555 IC101 BD3401KS2 (MAIN BOARD) TNF2 VOLOUT2 BASS MIDDLE TREBLE TNF1 BBNF2 SUR1 BBIN2 BASS MIDDLE TREBLE SURROUND SUR2 fc=100HZ LINEOUT2 LINEOUT1 BUFFER MIC MIX SAOUT2 VOCAL FADER SWOUT SAOUT1 FILTER 1/2 Vcc GAME L GAME R TUNER L INPUT...
  • Page 50: Exploded Views

    HCD-RG555 SECTION 6 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Accessories are given in the last of this The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied.
  • Page 51: Front Panel Section (1)

    HCD-RG555 6-2. FRONT PANEL SECTION (1) not supplied (REM board) FL601 not supplied not supplied not supplied not supplied (H/P JACK board) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-951-620-01 SCREW (2.6X8), +BVTP 4-238-628-01 MIC KNOB...
  • Page 52: Front Panel Section (2)

    HCD-RG555 6-3. FRONT PANEL SECTION (2) not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-231-841-01 SPRING (HEART CAM-B) 4-231-824-01 CAM (A), HEART 4-231-825-01 CAM (B), HEART 4-231-836-01 SPRING (HEART CAM-A)
  • Page 53: Front Panel Section (3)

    HCD-RG555 6-4. FRONT PANEL SECTION (3) not supplied not supplied not supplied supplied not supplied (6 STREAM LED board) not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description...
  • Page 54: Main Board Section

    HCD-RG555 6-5. MAIN BOARD SECTION not supplied not supplied PT901 F906 F905 F908 F909 F907 F904 not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
  • Page 55: Cd Mechanism Section (1)

    HCD-RG555 6-6. CD MECHANISM SECTION (1) (CDM74-F1BD81) M741 CD mechanism deck section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-21 SCREW (M2.6), +BTTP 4-243-820-01 GEAR (TABLE) 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 4-243-819-01 GEAR (GENEVA)
  • Page 56: Cd Mechanism Section (2)

    HCD-RG555 6-7. CD MECHANISM SECTION (2) (CDM74-F1BD81) RE701 M751 S101 not supplied (CONNECT board) not supplied FC901 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No.
  • Page 57: Electrical Parts List

    HCD-RG555 SECTION 7 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • SEMICONDUCTORS The components identified by mark 0 or dotted line with mark the parts list may be different from the In each case, u : µ, for example: 0 are critical for safety.
  • Page 58 HCD-RG555 BD81A Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q489 8-729-140-84 TRANSISTOR 2SC1841-PAFAEA R489 1-247-847-11 CARBON 4.7K 1/4W Q490 8-729-140-84 TRANSISTOR 2SC1841-PAFAEA R490 1-247-847-11 CARBON 4.7K 1/4W 0 R495 Q491 8-729-821-00 TRANSISTOR 2SA1207 1-202-972-61 FUSIBLE...
  • Page 59 HCD-RG555 BD81A CONNECT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C209 1-162-970-11 CERAMIC CHIP 0.01uF R132 1-216-833-11 METAL CHIP 1/10W C210 1-107-826-11 CERAMIC CHIP 0.1uF R133 1-216-848-11 METAL CHIP 180K 1/10W C211 1-164-230-11 CERAMIC CHIP...
  • Page 60 HCD-RG555 CONNECT DRIVER H/P JACK MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C873 1-162-927-11 CERAMIC CHIP 100PF R733 1-249-417-11 CARBON 1/4W C874 1-164-315-11 CERAMIC CHIP 470PF R734 1-249-430-11 CARBON 1/4W C875 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 61 HCD-RG555 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C140 1-131-690-31 FILM 0.068uF C244 1-131-681-31 FILM 0.015uF C141 1-126-964-11 ELECT 10uF C246 1-136-157-00 FILM 0.022uF C142 1-126-964-11 ELECT 10uF C248 1-162-964-11 CERAMIC CHIP 0.001uF C143...
  • Page 62 HCD-RG555 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D206 8-719-988-61 DIODE 1SS355TE-17 Q103 6-550-889-01 TRANSISTOR 2SC5938-T112-1B D207 8-719-988-61 DIODE 1SS355TE-17 Q104 6-550-889-01 TRANSISTOR 2SC5938-T112-1B D211 8-719-988-61 DIODE 1SS355TE-17 Q105 8-729-120-28 TRANSISTOR 2SC1623-L5L6 D212 8-719-988-61 DIODE 1SS355TE-17...
  • Page 63 HCD-RG555 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R137 1-216-833-11 METAL CHIP 1/10W R220 1-216-837-11 METAL CHIP 1/10W R138 1-216-821-11 METAL CHIP 1/10W R221 1-216-837-11 METAL CHIP 1/10W R140 1-216-821-11 METAL CHIP 1/10W R222 1-216-830-11 METAL CHIP 5.6K...
  • Page 64 HCD-RG555 MAIN MIC JACK MOTOR (LD) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R347 1-216-837-11 METAL CHIP 1/10W C824 1-162-970-11 CERAMIC CHIP 0.01uF R348 1-216-837-11 METAL CHIP 1/10W C825 1-164-816-11 CERAMIC CHIP 220PF R351 1-216-835-11 METAL CHIP...
  • Page 65 HCD-RG555 MOTOR (TB) PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-687-134-12 MOTOR (TB) BOARD C653 1-162-959-11 CERAMIC CHIP 330PF C654 1-164-156-11 CERAMIC CHIP 0.1uF ***************** C655 1-164-156-11 CERAMIC CHIP 0.1uF < CONNECTOR > C656...
  • Page 66 HCD-RG555 PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > R645 1-216-823-11 METAL CHIP 1.5K 1/10W R646 1-216-823-11 METAL CHIP 1.5K 1/10W Q601 8-729-116-57 TRANSISTOR 2SB1068-K R647 1-216-825-11 METAL CHIP 2.2K 1/10W Q602...
  • Page 67 HCD-RG555 PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R710 1-216-833-11 METAL CHIP 1/10W R770 1-216-845-11 METAL CHIP 100K 1/10W R711 1-216-833-11 METAL CHIP 1/10W R771 1-216-841-11 METAL CHIP 1/10W R712 1-216-797-11 METAL CHIP 1/10W...
  • Page 68 HCD-RG555 PANEL SENSOR SUB TRANS TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark S644 1-762-875-21 SWITCH, KEYBOARD (TUNING +) < SWITCH > S645 1-762-875-21 SWITCH, KEYBOARD (G/g) 0 S901 S646 1-762-875-21 SWITCH, KEYBOARD (M ALBUM +)
  • Page 69 HCD-RG555 VIDEO OUT 6 STREAM LED Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark VIDEO OUT BOARD MISCELLANEOUS **************** *************** < CONNECTOR > 1-400-285-11 F-BEAD, E2515MRT (EXCEPT E15) 1-769-940-11 WIRE (FLAT TYPE) (11 CORE) * CN805...
  • Page 70 HCD-RG555 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2004. 04...

Table of Contents