RH-18/36/38
Disassembly Instructions
Removee C-Cover from Engine Module.
Remove LCD inclusive Lightguide.
Take Engine Module from D-Cover.
If System Connector is tight in the D-Cover, SRT-6 should
be used to loosen it.
Page 6
Company confidential
Unlock LCD snaps on both sides of the display.
Use tweezers when removing the Speaker.
Lever out Shielding, beginning from the top side of the
unit.
Carefully push out Microphone from System Connector. Moder-
ate force is required for this action.
Nokia Corporation.
CCS Technical Documentation
Issue 1 10/03