SB2040 Snowblower
Assembly and Installation
Proper installation of the SB2040 includes installing four (4) 26-lb.
counterweights. These counterweights are not included with the
snowblower and must be purchased separately.
1. Remove the lag bolts holding the blower head and the pulley
assembly to the shipping pallet.
2. Remove the blower head and pulley assembly from the pallet.
3. Remove the loose parts box, then inventory the contents.
Inventory Loose Parts
WORM SUPPORT BRACKET
ANTIFRICTION RING
COUNTERWEIGHT B RACKET
SUBFRAME ASSEMBLY
POP 52152 (9610)
L-SHAPED BRACKETS (2)
LIFT PLATE (2)
DISCHARGE CHUTE
PUSH FRAME
These brackets (and associated hardware) are loosely installed on
the subframe of units with serial numbers from 1000001
Assembly and Installation
HOLD - DO W N BRACKET
WORM GEAR
DISCHARGE GU A RD
HANDLE
HANDLE SUPPORT
-
1000500.
5