Troubleshooting - Sony TRINITRON KV-XR29M50 Service Manual

x

Troubleshooting

If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.
RESET
RESET
Troubleshooting guide
Symptom
Snowy picture
• The connection is loose
or the cable is
damaged.
• The antenna setup is
inappropriate.
Noisy sound
• Channel presetting is
inappropriate or
incomplete.
• Signal transmission is
low.
Distorted picture
• Broadcast signals are
too strong.
Noisy sound
Good picture
• The TV system setting
is inappropriate.
Noisy sound
Reset function
Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the "Initial Setup" menu will appear.
TV
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
Possible cause
• Check the antenna cable and connection
• Check the antenna setup.
• Display the "Channel Setup" menu and
• Try using a booster.
• Turn off or disconnect the booster if it is in
• Display the "Channel Setup" menu and
Solutions
on the TV, VCR and at the wall.
Contact a Sony dealer for advice.
select "Manual Program" to preset the
channel again.
use.
select the appropriate "TV System".
Page
23
–
21
–
–
21
continue
Additional Information
25