Operation - LG WD-8050F Service Manual

5. OPERATION

LED display
ƒUDisplay the remaining time (Hour : Minute ) to
finish.
ƒUIn case of abnormal operation, error indications
(
are displayed.
ƒUSee trouble shooting guide.
Error display.
ƒUThe display blinks if there is
an error.
14
Refer Refer
ƒUno inlet : Trouble with water
supply.
ƒUimbalance : The laundry is
tilted to one side.
ƒUno drain : If the drain pump
filter is clogged.
Door lock lamp
ƒU It shows whether the door
can be opened or not.
ƒU when the lamp is on, the
door canÕt be opened.
For manual wash, rinse and spin speed
ƒU Use these buttons to change wash/rinse/spin
ƒU When lamp is off, no selection has been made.
ƒU Prewash is available for Coloreds, Whites, Synthetic
Water temperature selector
ƒUPress the button to select water temperature.
ƒUThe water temperature
[40¡£ C ¤A60¡£ C ¤Acold] can be selected in Coloreds,
)
Synthetic
ƒU95¡£ C is selected for Whites only.
ƒUBy pressing the button during operating the washer,
the present temperature is displayed.
Rinse hold
ƒU If you desire to leave fabrics in the machine
ƒU To drain and spin, press the Rinse button to
10
without spinning after rinse to prevent them
getting wrinkled, you may select rinse Hold by
pressing the Rinse button.
turn off the rinse Hold lamp.