Wireless Subwoofer Setup; Pairing Wireless Subwoofer - iLive ITPW891B User Manual

Wireless Subwoofer Setup

Important Note
While the wireless subwoofer was paired at the
factory to allow for immediate operation, it will
occasionally become un-paired in transit. Un-
pairing can also occur in day-to-day operation
due to different environmental influences. This is
normal. Should this occur, please follow the pairing
instructions below.
What does it mean to pair?
Pairing allows the sound bar to recognize a wireless
subwoofer. Once a wireless subwoofer is paired, the
sound bar will transmit audio to it.
Additional Information
• Once paired, the wireless speaker can be moved
up to 200ft (line-of-site) or up to 90ft (indoors)
depending on environmental conditions. Should
the sound drop or become garbled it will be
necessary to move the wireless subwoofer to
another location in order to receive the signal
clearly.
Link Indicator
OFF
SLOW FLASHES
QUICK FLASHES
SOLID LIGHT
Customer Support: 1-888-999-4215
System Status
Powered off
Standby mode
Attempting to pair
Paired and playing
Pairing the Wireless Subwoofer
1. Plug the sound bar into a power source and press
the Power button to power the sound bar on.
2. Plug the wireless subwoofer into a power
source and press the Power switch to
power the wireless subwoofer on.
3. Press and hold the Pairing button on
the wireless subwoofer until the Power/
Pairing Indicator begins to blink.
4. While the Power/Pairing Indicator on the
wireless subwoofer is blinking, press and
hold the Pairing button on the sound bar.
The Power/Pairing Indicator will remain lit once the
sound bar and wireless subwoofer has been paired.
After pairing, the wireless subwoofer may take
up to 30 seconds to begin playing audio from the
sound bar.
iLive 11