2 - 2
MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide
Removing the Screen Protector
A screen protector is applied to the MK3000. Motorola recommends using this to minimize wear and tear.
Screen protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift
it off the display.
CAUTION
For a package of five replacement screen protectors, contact Motorola.
Inserting a MicroSD Card
To use a microSD card, insert it into the slot in the back of the MK3000 as shown on the device. See
on page 1-3
for slot location. To remove the card, press down gently on it to eject, then remove it from the slot.
Connecting the MK3000
The MK3000 supports both wired and wireless solutions. Connecting the MK3000 includes the following:
•
Power Connection on page 2-3
•
Wired Ethernet Connection to a Host on page 2-3
•
Power through AC Outlet
•
Power through POE
•
Wireless Ethernet Connection to a Host on page 2-4
•
USB Connection to a PC and Peripherals on page 2-5
•
Connecting to a PC
1.1 host/client port
•
Connecting to Peripheral Devices
To access the Windows
Do not use a sharp object to remove the protector. Doing so can damage the display.
(not required for POE configurations)
- ActiveSync connection to a desktop computer for programming via the mini-USB
- via the mini-USB 1.1 host ports
®
CE Desktop, see
Accessing the Windows CE Desktop on page
Figure 1-2
4-2.