InFocus in2124 User Manual page 29

Lamp...
Programmed Dimming: When enabled, Programmed Dimming enhances
contrast ratios in dark scenes and disables Lamp Low Power. Programmed
Dimming will impact lamp life and system noise performance. Programmed
Dimming works in conjunction with the lamp. If Lamp Low Power is enabled,
Programmed Dimming is unavailable.
Lamp Low Power: toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector qui-
eter.
OSD Setup...
Language: allows you to select a language for the onscreen display.
Menu Position: allows you to change the position of the On Screen Display
items.
Menu Transparency: allows you to change how much of the projected
image behind the menu you can see. As the value increases, more of the
image behind the menu is visible.
Show Messages: displays status messages (such as "Searching") in the lower-
left corner of the screen.
PIN Settings
PIN Protect: The PIN (personal identification number) feature allows you to
password protect your projector. Once you enable the PIN feature, you must
enter the PIN before you can project an image. Use the Up/Down/Left/
Right arrows buttons on the remote or keypad to set a 4-button press
sequence. If you enter an incorrect PIN 3 times in succession, the projector
will automatically shut down. If you lose or forget your custom PIN, contact
InFocus Technical Support.
To enter the PIN at projector startup:
Power up the projector. The "Enter PIN" dialog box displays after the star-
tup screen. Enter the PIN. Use the Up/Down/Left/Right arrows buttons on
the remote or keypad to enter the correct 4-button press sequence. See the
description above for instructions.
To change the PIN:
Select "Change PIN..." in the Advanced Menu > Setup > PIN settings menu.
Enter the existing PIN. Enter the new PIN.
Power
Power Saving Mode: When the Power Saving Mode is On and the projec-
tor is in standby (powered off but connected to AC power), the monitor out
function will not work.
Source
Auto Source: When this feature is On, the projector automatically finds the
active source, checking the selected Power-up Source first. When this feature
is Off, the projector defaults to the source selected in Power-up Source. To
display another source, you must manually select one by pressing the Source
button on the remote or keypad and selecting one from the displayed Source
menu.
Power-up Source: determines which source the projector checks first for
active video during power-up.
Search Screen: allows you to display a blank screen instead of the default
screen at startup, and when no source is detected.
28