iRobot Scooba 300 series Owner's Manual page 4

Scooba Essential Maintenance
To keep Scooba running at peak performance, perform the following
maintenance tasks after every cleaning cycle.
Rinse and Empty Scooba's Tank
Scooba puts down fl uid from the CLEAN tank and collects dirty solution
into the DIRTY tank. Empty and rinse both tanks after every cleaning cycle.
or Dirty tanks.
Run water into the Empty tanks and partially
1 2
back openings. refi ll tanks with warm water.
Rinse Scooba's Filter and Vacuum Port
Remove fi lter. Rinse under water.
1 2
Remove vacuum port. Rinse under water.
1 2
5 iRobot Scooba Owner's Manual
Vigorously shake the tank and
3
empty through all openings.
Replace item. Do not force.
3
Replace item. Do not force.
3
Clean Scooba's Cleaning Head and Brush
Scooba's brush is located inside a cartridge called the 'cleaning head'.
Access to the cleaning head is inside Scooba, so the tank needs to be
removed when removing and replacing the cleaning head.
With the tank removed, push eject
1
button to remove the cleaning head.
Rinse the cleaning head and brush
3
under water.
Correct
CAUTION: Scooba contains electronic components that can be
damaged by spills of water or other liquids. Clean the bottom and top
of Scooba with a damp cloth only. Do not pour or spray water onto
Scooba, other than into the Clean or Dirty tanks.
Open the cleaning head by pushing
2
the tabs in opposite directions, then
remove the brush.
Ensure the tank is removed before
4
replacing the cleaning head. The
cleaning head will click into place.
X Incorrect
global.irobot.com 6