Toshiba XD-E500KU Owner's Manual page 34

~
., stomizing the Function Settings (continued)
[ Setting details
Screen Saver
To turn on or off the screen saver (screen protection
to prevent image burn).
1) Press SETUP button.
2) Press AI 'f' button to select Misc.
3) Press .. button, then use the AI
'f'
button to select
Screen saver.
4) Press ENTER button, then use the AI
'f'
button to
select the On or Off mode.
5) Press SETUP button to exit the menu.
Note
When you leave the unit in OVO stop mode for approximately
2 minutes, the screen saver of the OVO player automatically
appears if you set the Screen saver to On mode. To turn off
the screen saver, press the PLAY button.
HDMI Control: REGZA-Link
You can control this OVO unit from TV's remote which is
connected via HOMI cable.
1) Press SETUP button.
2) Press AI
'f'
button to select Misc.
3) Press .. button, then use the AI
'f' button to select
HOMI Control.
4) Press ENTER button, then use the A/
'f' button to
select the On or Off mode.
5) Press SETUP button to exit the menu.
Off: To deactivate HOMI Control.
On: To activate HOMI Control.
34
Functions available for the HOMI Control
One touch play
When the operations with following button of this unit's
remote control are performed, the TV will automatically
switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a disc
is inserted.)
System information
Get
&
Set Menu Language:
This unit recognizes the OSD languages set for the
TV and automatically set the same language as the
player menu language (OSO menu language) for this
unit.
Power off:
When you turn the TV off, this unit will automatically
turn off.
Receiving operational signal from TV's Remote:
You can operate this unit with TV's remote control.
Check your TV owner's manual for details.
Notes
• This function may not work properly depending on
the TV you are connecting.
• If the Video Output is not set to "HOMI", HOMI Control will
not work.
• Other components must be compatible with HOMI Control
in order to use this function.
Dim Ctrl
1) Press SETUP button.
2) Press A /
'f'
button to select Misc.
3) Press .. button, then the A I
'f'
button to select Dim
Ctrl.
4) Press ENTER button, then the A I
'f'
button to change
the On / Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
On: The XOE Logo on the front panel will light up when the
unit is powered on.
Oft:
The XOE Logo on the front panel will not light up.
Note
The setting of Oim Ctrl will reset to "On" after the unit is
powered off.