Entering The Feature Settings Menu; Feature Settings Menu Items; Display Language; Auto Door Lock - Chevrolet Captiva 2014 Owner's Manual

Entering the Feature
Settings Menu
1. Turn the ignition on and place
the vehicle in P (Park).
To avoid excessive drain on the
battery, it is recommended that
the headlamps are turned off.
2. Press to scroll through the
available customizable options.

Feature Settings Menu Items

The following are customization
features that allow you to program
settings to the vehicle:
DISPLAY IN ENGLISH
This feature will only display if a
language other than English has
been set. This feature allows you to
change the language in which the
DIC messages appear to English.
Press until the PRESS
DISPLAY IN ENGLISH screen
appears on the DIC display. Press
once to display all DIC messages
in English.

DISPLAY LANGUAGE

This feature allows you to select the
language in which the DIC
messages will appear.
Press until the PRESS
SET DISPLAY LANGUAGE screen
appears on the DIC display. Press
once to access the settings for
this feature. Then press
through the following settings:
ENGLISH (default): All messages
will appear in English.
FRANCAIS: All messages will
appear in French.
ESPANOL: All messages will
appear in Spanish.
PORTUGUESE: All messages will
appear in Portuguese.
NO CHANGE: No change will be
made to this feature. The current
TO
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
Instruments and Controls

AUTO DOOR LOCK

This feature allows you to select
when the vehicle's doors will
automatically lock. See
TO
Press until PRESS
AUTO DOOR LOCK appears on the
DIC display. Press
to scroll
access the settings for this feature.
Then press
following settings:
SHIFT OUT OF PARK (default):
The doors will automatically lock
when the vehicle is shifted out of
P (Park).
AT VEHICLE SPEED: The doors
will automatically lock when the
vehicle speed is above 13 km/h
(8 mph) for three seconds.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
while
To select a setting, press
the desired setting is displayed on
the DIC.
5-37
.
TO SET
once to
to scroll through the
while