BenQ G922HD Service Manual page 29

18.5" LCD Color Monitor
Prevents all the monitor settings
from being accidentally changed.
When this function is activated,
OSD Lock
the OSD controls and hotkey
operations will be disabled.
Press MENU to leave the OSD Settings menu.
Allows the monitor settings to be
DDC/CI* set through the software on the
PC.
When this function is activated,
HDMI port will be in the input
HDMI Auto
auto select loop. Otherwise,
Switch
HDMI can only be selected by
input select or by hot key.
Displays the current monitor
Information
property settings.
Resets all mode, color and
geometry settings to the factory
Reset All
default values.
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote diagnostics.
Press the or keys to change
the settings.
To unlock the OSD controls
when the OSD is preset to
be locked, press and hold
the "MENU" key for 15
seconds to enter the "OSD
Lock" option and make
changes.
Alternatively, you may use
the or keys to select
"NO" in the "OSD Lock"
submenu from the "OSD
Settings" menu, and all OSD
controls will be accessible.
Press the ENTER key to select
this option.
Press the or keys to change
the settings.
Press the ENTER key to select
this option.
Press the or keys to change
the settings.
Press the ENTER key to select
this option.
Press the or keys to change
the settings.
29
BenQ G922HD
• YES
• NO
• ON
• OFF
• ON
• OFF
• YES
• NO