Table of Contents
Advertisement
7) Unscrew the two Torx+ 4 screws in the order
shown.
9) Use the SRT-6 to open the two clips of the A-COVER
ASSY. Slide the SRT-6 along the cover edge. Do the
same on the opposite side.
11) Lift up the LCD with the SS-93.
13
8) Turn the phone over and slide it open. Then
unscrew these two Torx+ 4 screws in the order
shown.
10) The A-COVER ASSY can now be removed.
Remember to protect the LCD with protective film.
12) To disconnect the LCD flex, first open the locking
mechanism of the connector with the SS-93. Then pull
on the flex with the pliers. Be careful not to damage
the connector.
Confidental
Copyright © 2009 NOKIA. All rihts reserved
6260 Slide RM-368
Service Manual Level 1&2
ISSUE 1
Advertisement
Table of Contents
