Location And Function Of Controls - LG DT-50PY10 Service Manual

Location and Function of Controls

Location and Function of Controls
DIGITAL AUDIO (OPTICAL)
UPGRADE REMOTE
DVI COMPONENT 1
PORT CONTROL INPUT
1 2
1. UPGRADE PORT
This port is used to upgrade the software version and debug
without changing the hardware.
Be careful not to use this port. Just contact your dealer or ser-
vice centre.
2. CONTROL LOCK / REMOTE CONTROL
3. DVI INPUT/COMPONENT 1 INPUT/OUTPUT (DIGITAL
AUDIO (OPTICAL))
Connect digital audio from various types of equipment.
Note: In standby mode, these ports will not work.
4. DVI INPUT / AUDIO INPUT / RGB INPUT (PC/DTV)
Connect the monitor output socket of the PERSONAL COM-
PUTER to this socket.
Note: If you want to use RGB/DVI audio, we strongly recom-
mend that you use the cable that has a core, or the EMI Filter
core along with separate cable.
5. COMPONENT INPUT
Connect DVD video outputs to Y, P
INPUT and audio outputs to Audio sockets of AUDIO INPUT.
DVI INPUT
AUDIO INPUT
OUTPUT
INPUT (PC/DTV)
3 4
, P of COMPONENT
B R
<Back Panel>
COMPONENT 2
COMPONENT 1
RGB INPUT
R L
(PC/DTV)
AUDIO INPUT VIDEO INPUT
5
6. AUDIO/VIDEO IN SOCKETS (A/V INPUT 1)
Connect the audio/video out sockets of external equipment to
these sockets.
S-VIDEO/AUDIO IN SOCKETS
Connect the S-VIDEO out socket of the VCR to the S-VIDEO
socket.
Connect the audio out sockets of the VCR to the audio sock-
ets as in A/V INPUT 1.
7. ANTENNA INPUT
8. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
9. AUDIO/VIDEO IN SOCKETS (A/V INPUT 2)
S-VIDEO/AUDIO IN SOCKETS
- 6 -
MONITOR
DVD
. OUTPUT
DTV
A/V
INPUT
INPUT 1
Antenna
ANALOG/DTV
R AUDIO L VIDEO S-VIDEO
6 7
9
AC INPUT
8