Attaching The Blade To The Tractor - Honda DB5054 Operator's Manual

ASSEMBLY AND INSTALLATION (Continued)
4. Carefully drive a 3/16" roll pin into the
hole in the adjustment pin. The roll pin
should extend an equal distance from
both sides of the adjustment pin.
5. Pivot the female quick-hitch to obtain the
desired blade angle, align the adjustment
pin holes and then insert the
adjustment pin.
NOTE: Be sure that the pin extends through
the bottom plate of the hitch box.
6. Slide the skid shoes into the brackets on
the back of the blade.
7. Set each skid shoe to provide the proper
amount of blade clearance (refer to the
Operation Section on page 8) and then
insert a skid shoe pin through the
bracket and shoe. Secure the skid shoe
pins with 3 x 65 mm spring pins.
ATTACHING THE BLADE
TO THE TRACTOR
Carefully slide the female hitch onto the
tractor's male quick-hitch. Move the quick-
hitch lever to "LOCK", and secure it with a
linch pin a s shown.
3 x 65 mm SPRING PIN
7