LG WT-R857 Service Manual page 19

3
The pulsator rotates for
Water will be
8 seconds to detect the
supplied for 2
laundry load.
minutes after the start
Then the WATER
of the wash to
LEVEL
supplement the water
will be shown and
the laundry has
water will be supplied.
absorbed.
4
4
4
4
Close the lid
5
When the wash
program ends, the
buzzer will ring for 10
seconds before the
Power goes off
automatically.
6
6
6
6
Finish
6
If water is already in the tub, or putting wet
laundry into the tub before starting will increase
the WATER LEVEL.
With lightweight bulky loads, WATER LEVEL can
be set low.
Changes to Water Temperature and wash level
are possible during operation.
7
7
Before starting to wash, make sure that the
laundry is washable.
Washing with HOT water may damage the
laundry.
Ensure that the load is under 2kg.
7
When setting the WATER LEVEL manually, do
not set to Medium to prevent damage to
laundry.
Washing with HOT water may damage the
laundry .
Ensure that the load is under 2kg.
In order to avoid damage to laundry, the spin
cycle may appear slow. This also avoids
wrinkles and clothing may still contain some
water. This is normal.
7
19
Caution & Note