Stb Control - Samsung 6300 User Manual

You can control your set-top-box or satellite box with the Remote Control. To establish
control, you must first set up theIR extender cable. If you don't have an STB, skip this
section.
1 Connect theIR extender cable to the TV's IR output connector.
ll ~
OOJ ~
lml ~
~ ~·
I ~
I ~
I
....
"""" I
,.. ,_"" I
~-----
I
~ ~-il
.u; . . . .
~
. . . .
(J
~~=~
·-·-· • [I)
•
~
------
- The displayed image may differ depending on the model.
I
IR Out
Connect theIR Extender
: Cable here.
Place the transmitter end
within 4 inches of the set-
top-box's remote control
sensor.
2 Position the transmitter end within 4 inches (1 0 em) of the set-top-box's remote
control sensor, pointing in the direction of the sensor. Make sure there are no
obstacles between the transmitter end of theIR extender cable and the set-
top-box or satellite box. Any obstacles will interfere with the transmission of the
remote control signals.
3 Finalize control of your set-top or satellite box when you run Initial Setup.