Honda Untitled Owner's Manual page 23

l
Adjust the snow discharge chute to avoid hitting the operator,
bystanders, windows, and other objects with thrown snow. Stay clear
of the snow discharge chute while the engine is running.
l
If the snow discharge chute becomes clogged, stop the engine and use a
wooden stick to unclog it. Never put your hand into the snow discharge
chute while the engine is running; serious personal injury could result.
NOTE:
l
To move the machine without engaging the snow-blowing mechanism,
squeeze the drive clutch lever only. Do this when moving the machine to
or from the area to be cleared.
l
To engage the snow-blowing machanism without using the drive
mechanism, squeeze the auger clutch lever only. Do this if you wish to
maneuver the machine manually while clearing snow.
l
Squeeze both levers to propel the machine and clear snow simul-
taneously. When both levers are squeezed, the drive clutch lever locks
the auger clutch lever down (p. 1 1). The auger clutch lever remains lock-
ed down so long as one hand continues to squeeze the drive clutch
lever. Releasing the drive clutch fever then unlocks and releases the
auger clutch lever.
l
If the snow is deeper than the height of the. auger, move the machine
back and forth to remove snow gradually.
l
For best efficiency, clear snow before it melts, refreezes and hardens.
AUGER CLUTCH LEVER
Squeeze to engage
the snow blowing
mechanism
DRIVE CLUTCH LEVER
Squeeze to engage the
drive mechanism
22