Table of Contents
Advertisement
In case of turning Off
1
Close the front panel.
- Lift down both sides of the panel slightly.
2
Open the front panel.
- Lift up both sides of the cover slightly.
* The feature can be changed according to
a type of model.
3
Press the On/Off button.
* The feature can be changed according to
a type of model.
4
Close the front panel as soon as you turn
on/off button.
- Lift down both sides of the panel slightly.
ADVANCED FUNCTIONS
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings. This function is a factory de-
fault setting.
Disabling auto restart
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according to
a type of model.
2
Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp will
blink 6 times.
* The feature can be changed according to
a type of model.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp will
blink 4 times.
!
NOTE
• If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
• In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
19
Advertisement
Table of Contents
