Samsung 7500 Series User Manual page 67

The Smart Touch Controi/IR Blaster Guide
Before using Smart Touch Control and IR Blaster, it should be paired with TV.
To control the device using the IR Blaster, setup is needed on the universal remote menu.
Please install the IR Blaster on the tea table in front of the TV.
I
Smart Touch Control (RMCTPE1}
Turns the TV on and off.
Displays color and playing control functions.
. . . . : Use these buttons according to the
directions on screen.
Play1ng control buttons: Use these buttons
in a specific feature.
G :
Displays a list of recently used
functions.
-VOL+: Adjusts the Volume.
Displays the shortcut functions list.
RETURN':): Go to previous menu screen
VOICE~:
Take your voice command and
enter a text using your voice.
NUMBER::: Displays the Number button
screen
You can speak a voice command that
displayed to the TV using MIC .
LED to show the act1ve dev1ce.
D:
Quickly select frequently used functions.
v
C
H
A:
Changes channels.
Touch Pad
• If you press the Touch Pad when usf ng Smart Hub, Web
Browser, and AIIShare Play, the Touch Pad switches to the
Scroll mode.
• In the Scroll mode, slide your finger in the Touch Pad from
one side to the other, the highlight moves page units.
• To return to the general mode of the Touch Pad, press the
Touch Pad or RETURN':> button on your Smart Touch
Control.
Brings up the Smart Hub applications. ----;-+-----"
• If you don't press any button w1thin 30 seconds, the Smart
Touch Control is set to sleep mode automatically.
• To wake up the Smart Touch Control, press the Touch Pad.
Inserting Batteries
I
IR Blaster (VG-IRB2000)
• If you press the Touch Pad for 2 seconds. It has the same
effect as pressing the MUTE¢ button on your remote.
1.
Press the back of the remote at the very bottom with both thumbs,
and then slide the battery cover up in the direction of the arrow.
2. Insert the 2
M
into the battery compartment.
3. Slide the cover down in the direction of the arrow to close the
battery cover.
To control to external devices connected to your TV, setting up the Un1versal Remote.
If you adjust the external device to the Smart Touch Control, IR Blaster will send the IR signal to an external device.
Device Indicator LED
IR Blaster shows the pairing
state.
1. Hold the both sides of the battery holder and pull it out.
2. Insert the 4
M into
the battery compartment.
3. Push it back.
1111111111111111111111111111111111111111111
BN68-04345A-02