Screen Size Adjustment - Sanyo PLC-XW300 Owner's Manual

Computer Input
Store
To store the adjusted data, select Store and press the Point
select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select Yes. Stored
data can be called up by selecting an Image (1–4) in the
Image Mode Selection on page 32.

Screen Size Adjustment

This projector has the picture screen resize function, which
enables you to customize the image size.
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2 Use the Point
then press the SELECT button .
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger or smaller than the screen size
(1024 x 768), the projector enters to the panning mode
automatically. Use the Point
image. When adjusted, the arrows will turn red. When
reached to the correction limits, the arrows will disappear.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16:9.
Full
Provide the full screen image.
Note:
when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.28).
higher than it, reset the resolution to the lower before connecting to the projector.
True, Full, and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p or 575p is
selected in the PC System Menu (p.28).
34
buttons to
buttons to select Screen and
button.
or the SELECT
buttons select the desired item and
buttons to pan the
only Normal and Custom can be operated, Wide will be disabled and displayed in gray
A confirmation box appears and
then select Yes.
Screen Menu