Disabling The Serial Interface; Serial; References For Openvms Users - TallyGenicom Intelliprint mL260 User Manual

10-52 TallyGenicom Intelliprint mL260 User Guide
Custom Page size and Microsoft Word, Word 2000, and Word 2003
XON Error
DTR Polarity
RTS Polarity
Robust XON

Disabling the Serial Interface

The following selection becomes available within the PORT submenu of the INTERFACE menu
when the RS-232C/RS-422 serial interface is installed.

Serial

The Serial option enables you to turn off the serial port on the interface. This selections is often
used to permit uninterrupted communication to other ports such as the parallel or other network
ports.

References for OpenVMS users

You can print to your laser printer via the serial interface option from an OpenVMS system, either
directly connected to the system or through a network device such as a terminal server.
It is recommended that DECprint Supervisor (DCPS) be used for printing. Please see the "Setting
Up Printers" chapter of the DCPS System Manager's manual for information on creating a DCPS
print queue.
If DCPS will not be used, please see the "Setting Up and Maintaining Queues" chapter of the
OpenVMS System Manager's manual for information on setting up print queues using the Open-
VMS print symbiont.
Publication No. GEG-99199
AVAILABLE SELECTIONS
DEFAULT
AVAILABLE SELECTIONS
DEFAULT
AVAILABLE SELECTIONS
DEFAULT
AVAILABLE SELECTIONS
DEFAULT
AVAILABLE SELECTIONS
DEFAULT
Off
On
Off
High
Low
High
High
Low
High
Off
On
Off
On
Off
On
Jun 04