Triax TR 307 User Manual page 29

4.4 System Setting
RF Mode
You can select the RF Mode. If you get picture but no sound, the RF
Mode selecting might be wrong.
Select an RF Mode and then press the
Note
• PAL BG, PAL I, PAL DK, SECAM L, NTSC M
Freeze
Channel change mode.
4.4.5 Menu Transparency
From 20% to 100% will give the variable transparency on Video and
OSD screen.
To set menu transparency, press the
Press the OK button and then press the
select the Menu Transparency,
or Subtitle Transparency.
The transparency will be applied on the screen.
4.4.6 System Information
Displays the system information: MODEL name, Last Update, S/W, H/W,
Loader version, C.A
Press the UP/DOWN button on the Setup list to select System
Information and then press the
4.4.7 Factory Reset
Press the UP/DOWN button on the Setup list to select Factory Reset.
Use this option only if you have to start the complete installation
procedure from scratch. If you continue from here, all your previous
settings and all channels will be cleared! The default data will be
loaded.
If you press the OK button, it asks for your confirmation.
If you want to reset, press the
exit this menu.
OK button.
UP/DOWN buttons.
UP/DOWN buttons to
Teletext Transparency,
OK button.
OK button, or press the EXIT button to
29