Toshiba 56HM195 Service Manual page 11

1. Turn off the TV and unplug the power cord.
2. STOP! Allow the lamp to cool for at least one (1) hour
before replacing it.
3. On the lamp unit door on the side of the TV, loosen the
screw using a manual screw driver, and then remove
the lamp unit door.
TV back
Lamp unit door detail
4. Using a manual screwdriver, loosen the two screws on
the lamp unit.
Lamp unit screws
5.
6.
loosen screw using
manual screwdriver
7.
- 11 -
Grasp the lamp unit handle and gently pull the lamp unit
straight out of the TV. Set the old lamp unit aside.
Carefully insert the new lamp unit straight into the TV
until it is fully seated.
Note :
Never subject the lamp unit to excessive shock.
Never touch the lamp unit glass or otherwise get it
dirty.
Doing so may affect the image quality and reduce
the service life of the lamp. See "Cleaning the lamp
unit glass" below.
Using a manual screwdriver, tighten two lamp unit
screws.
Note:Hand-tighten only. Do not use an electric screw-
driver.
Lamp unit screws
(use manual screwdriver only)
Note: Wear soft, lint-free
gloves when replacing
the lamp unit.