Gigabyte GA-Z77-D3H User Manual page 40

Advanced Memory Settings
Extreme Memory Pro le (X.M.P.)
Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Advanced
Frequency Settings menu.
Performance Enhance
Allows the system to operate at three different performance levels.
Normal Lets the system operate at its basic performance level.
Turbo Lets the system operate at its good performance level. (Default)
Extreme Lets the system operate at its best performance level.
DRAM Timing Selectable (SPD)
Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings
below to be con gurable. Options are: Auto (default), Quick, Expert.
Pro le DDR Voltage
When using a non-XMP memory module or
item will display as 1.50V. When
item will display the value based on the SPD data on the XMP memory.
Pro le VTT Voltage
The value displayed here is dependent on the CPU being used.
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically con gure this setting. (Default: Auto)
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access
different ranks of the memory to increase memory performance and stability. Auto lets the BIOS
automatically con gure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU and a memory module that support this feature.
, System Memory Multiplier (SPD), Memory
(Note)
- 39 -
is set to Disabled, this
is set to or , this
BIOS Setup