Deflection Yoke
Note :
1. Wedge A,B and C should be inserted following the sequence of 1,2 and 3 shown
in Fig. 25.
2. The wedges should be set 120 apart from each other.
3. Be certain that four wedges are firmly fixed and the Deflection Yoke is tightly clamped
in place.
Otherwise the Deflection Yoke may shift its position and cause a loss of convergence
and purity.
R-B Static
Convergence Magnet
25.3 mm
Clamp for
Convergence &
Purity Magnet
t
Purity Magne
(RB)-G Static
Convergence Magnet
Fig. 24
Fig. 25