Honda HRA215 Owner's Manual page 17

3. CONTROLS
CUTTING HEIGHT ADJUSTMENT LEVERS
B
The blade can cause
serious injury. Stop the engine
before adjusting cutting height.
There are five cutting height settings:
1 in (2.7 cm), l-l 12 in (4.0 cm), 2 in
(5.2 cm), 2-l 12 in (6.4 cm), and 3 in
(7.6 cm). These are approximate figures,
as the actual height of cut grass will vary
with lawn and soil conditions.
To adjust cutting height, pull each
adjusting lever toward the wheel, and
move it into another notch. Set both
adjusting levers to the same cutting
height position.
Select the correct cutting height for your
mowing requirements. Cutting height
settings of l-l 12 in (4.0 cm) or 2 in
(5.2 cm) are appropriate for most lawns
during cool weather. A higher cut may
be needed to protect the lawn during hot
summer months Consult a local nursery
or lawn & garden center for advice about
specific types of grasses and growing
conditions in your area.
If you are not certain which cutting
height to select, check the appearance
of the lawn after mowing a small area,
then readjust cutting height if necessary.
1 in (2.7 cm1
ADJUSTlkG LEVERS
ADJUSTING LEVER