Honda HR215HMA Owner's Manual page 75

3. With the mower in an upright position, start the engine outdoors,
and let it run until it reaches normal operating temperature to
evaporate any water remaining on the engine.
4. While the engine is running, operate the blade control lever 4 or 5
times to expel water from the blade control mechanism. Allow the
blade to spin for several minutes to ensure that no water remains.
5. Stop the engine, and allow it to cool.
6. After the mower is clean and dry, touch up any damaged paint, and
coat other areas that may rust with a light film of oil. Lubricate all
control cable cores with a silicone spray lubricant.
STORAGE
73