Chapter 3 Hardware Installation - D-Link Conexant HSFi DFM-562IS User Manual

D-Link DFM-562IS HSFi PCI Modem

Chapter 3 Hardware Installation

1. Remove the computer's case.
2. Insert the modem card into a spare PCI expansion slot.
3. Close the case.
4. Unplug the telephone from the wall socket, then plug the telephone into the
socket on the back of the modem marked PHONE.
5. Plug the phone cord supplied into the socket on the back of the modem marked
LINE.
6. Plug the other end of the cord into the wall socket.
7. Proceed to Software installation.
7
User's Guide