Sony NSP-1 Tutorials Manual page 9

Sony NSP-1 / BZNP-D1 Tutorials
6.3.2 Create and set up a group
1. Click "New Group" in Group Setup window
2. Enter "Tutorials" at "Group name"
3. Select "10:00:00" and "18:00:00" at Playout Time
4. Leave "00"00" at Sleep Time
5. Select "WVGA" at Screen Resolution and "Landscape"
at Screen Orientation (These must match to settings on
NSP1.)
6.3.3 Create a Template
1. Click "Template Settings" in Edit Group window
2. Type "Tutorials" at Template
3. Enter following numbers at X, Y, W and H
4. Click OK in "Template Settings" window
5. Click OK in "Edit Group" window
6.3.4 Assign NSP1 to a group
1. Click "Tutorials" on the right side in
the "Group Setup" window
2. Click "NSP-A" on the left side
3. Click Add
4. Close this window
6.4 Group
In order to simplify operations, creating playlists, scheduling playout and distributing content are based on
groups. If you do NOT purchase BZNPD1EXD and install a license, you can create only one group.
6.5 Template
NSP1 can play back several types of content with layered. In order to make authoring easy, you can create a
template of content arrangement in advance, and you can apply it to each group of NSP1 as a default.
It is not mandatory to create a template and assign it to a group, because you can change display arrangement
while you create a playlist, but you will realize that a template can save your time to create a playlist.
- 9 -