Information; Factory Setting; Upgrade By Usb - Fortec Star FS-4400 User Manual

4.1 Information

Press OK key to the Information window.

4.2 Factory Setting

Press OK key to enter into the Factory
Setting window.
Select Yes button and press OK key to return
to the factory setting. All searched channels
and set information will be erased.
Select No button and press OK key to cancel
this operation, or press MENU or EXIT key to
cancel and exit.

4.3 Upgrade by USB

1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between AllCode and
upgrade mode, Upgrade File
table below:
Upgrade Mode
All code :
Main Code:
Radio back:
Default db:
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
will show the corresponding file according to the
File feature
File named as "*.abs"
File named as *.bin
File named as "*.m2v",
the picture will be used
as both radio back and
menu back
File named as "*.bin"
Dump. When users switch the