HP Compaq dc5700 Quickspecs page 28

QuickSpecs
Technical Specifications - Graphics
1
DVI ADD2 Graphics Models
Form Factor
DVI-D Connector
Dual Head Support
Display Devices
Supported
NOTE: The DVI ADD2 card offers optimal performance with any display that meets applicable VESA
standards.
Colour Depth
Host Interface Connector Mechanically compliant with PCIe standard
Dot Clock
Display Modes
Resolution
640 x 480 VGA
800 x 600 SVGA
1024 x 768 XGA
1280 x 1024 SXGA
1600 x 1200 UXGA
1920 x 1080 1080P
1920 x 1200 WUXGA
1
The dc5700 supports Normal (or Non-reversed) layout ADD2 (Advanced Digital Display 2) adapter cards
inserted into the SDVO (Serial Digital Video Output) connector on the system board. This connector has the
physical appearance of a PCIe x16 connector; however, conventional PCIe cards are not supported in this
connector.
DA - 12545 Canada — Version 35 — February 12, 2009
DY674A DVI ADD2 adapter for Microtower and Small Form Factor
Low-profile card
Compliant with DDWG (Digital Display Working Group) and VESA specifications
for a single-link digital DVI (DVI-D) connector.
Yes, when used with the integrated VGA connector
HP L1530
HP L1740
HP L1755
HP L1940
HP L1955
HP L2035
HP L2335
32 bpp maximum
Complies with the Intel ADD2 and Intel Serial Digital Video Output (SDVO)
specifications
165 MHz maximum
Supports display modes with pixel clocks up to 165-MHz bandwidth on the
link, as shown in the following table.
60-Hz, reduced blanking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
HP Compaq dc5700 Business PC
60-Hz
Yes
Yes
Yes
Yes
Yes
No
No
Page 28