Lindy 42890 User Manual page 9

User Manual English
By clicking on the Network Configuration link you can change the IP address and name of the
device and switch DHCP on or off. If you have changed your password from the default blank
password you will need to enter it when prompted, before your changes will be saved
If you need to reset your device from your computer, simply click on the Server Reset link and
then enter your password, before clicking Reset Server
If you need to return your device to its original settings you can click the Factory Default link
and enter your password, before clicking Reset Server
From time to time new firmware may be made available, to improve performance of your device.
You will need to download the firmware from www.lindy.com before starting this procedure and
it is also recommended that you exit any other applications running on your computer
Click the Firmware Update link and you will see the screen below. Enter your password and
click on the Browse button to navigate to the location that you have saved the firmware to and
click OK
9