Honda 2011 Ridgeline Owner's Manual page 165

Honda 2011 ridgeline automobile owner's manual
Hide thumbs Also See for 2011 Ridgeline:
Table of Contents

Advertisement

To Play the AM/FM Radio
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
PWR button or the AM/FM button.
Adjust the volume by turning the
volume knob.
On models with navigation system
Pushing the AUDIO button will also
turn on the system (see page
The band and frequency that the
radio was last tuned to are displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is
broadcasting in stereo. Stereo
reproduction in AM is not available.
On the AM band, AM noise
reduction turns on automatically.
To Select a Station
You can use any of five methods to
find radio stations on the selected
band: tune, seek, scan, the preset
bars, and auto select.
TUNE
Use the TUNE bar to tune
the radio to a desired frequency.
Press the
to a higher frequency, and press the
163
).
side to tune to a lower
frequency.
SEEK
The SEEK function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the
SEEK/SKIP bar, then release it.
SCAN
The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
2011 Ridgeline
side of the bar to tune
or
side of the
Playing the AM/FM Radio
signal, it will stop and play that
station for about 10 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
Preset
Each side of the bars (1
6) can store one frequency on AM
and two frequencies on FM.
1.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
2.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
3.
Pick a preset number (1 6), and
hold it until you hear a beep.
4.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
CONTINUED
161

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ridgeline 2010

Table of Contents