Starting A Programme; Cancelling A Programme; Delay Start; Opening The Door - AEG L 73281 FL User Manual

14 www.aeg.com

9.5 Starting a programme

without delay start
Press Inicio/Pausa:
• The indicator Inicio/Pausa stops to
flash and stays on.
• The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
• The drain pump can operate for a
short time when the appliance fills wa-
ter.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts auto-
• The display shows the new val-
9.6 Starting a programme with

delay start

• Press Inicio Diferido again and again
until the display shows the delay you
want to set. The related indicator
comes on the display.
• Press Inicio/Pausa:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you
press Inicio/Pausa .
To cancel the delay start:
1. Press Inicio/Pausa to set the appli-
ance to pause.
2. Press Inicio Diferido until the display
shows
Press Inicio/Pausa again to start the
programme immediately.

9.7 Interrupting a programme

and changing the options
You can change only some options be-
fore they operate.
starts to flash on the
.
matically the programme dura-
tion agree with the laundry
load.
ue.
'.
1. Press Início/Pausa. The indicator
flashes.
2. Change the options.
3. Press Início/Pausa again. The pro-
gramme continues.

9.8 Cancelling a programme

1. Press On/Off for some seconds to
cancel the programme and to deac-
tivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
9.9 Changing the options
You can change only some options be-
fore they operate.
1. Press Início/Pausa. The related indi-
cator flashes.
2. Change the options.
3. Press Início/Pausa again. The pro-
gramme continues.

9.10 Opening the door

While a programme or the delay start
operates, the appliance door is locked
and the display shows the indicator
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press Início/Pausa to pause the ap-
pliance.
2. Wait until the door lock indicator
goes off.
3. Open the door.
4. Close the door and press Início/Pau-
sa again. The delay start continues
to operate.
Open the appliance door when the
programme operates:
1. Press On/Off for some seconds to
deactivate the appliance.
2. Wait for some minutes and then
open carefully the appliance door.
.