Page 1
WPL-26 Line Switcher WPL-26 Line Switcher OPERATING MANUAL AND USER GUIDE www.wharfedalepro.com www.wharfedalepro.com WPL_26 user manual.indd 2009-10-22 10:07:49...
OPERATING MANUAL AND USER GUIDE IMPORTANT WARNINGS & SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS carefully and become familiar with the features and functions of these products before operating them. RETAIN THESE INSTRUCTIONS for future reference. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
Line Switcher TABLE OF CONTENTS Important warnings & safety instructions ..................1 Table of contents ........................2 Introduction ..........................3 WPL-26 overview: ........................3 About the WPL-26 ........................3 Features .............................3 Connections/wiring ........................4 WPL-26 front panel........................5 WPL-26 rear panel ........................5 Dimensional drawings ........................6 Specifications ..........................6 WPL_26 user manual.indd...
ABOUT THE WPL-26 The WPL-26 is a high quality line level router designed to quickly and reliably direct a choice of source material to a specified line level location. Designed for use in a variety of environments from showroom to studio the WPL-26 is extremely simple to setup and use.
Place the IR receiver in the demonstration area, ideally near to the speakers that will be used in the demonstration, and route the cable to the input on the back of the WPL-26. With this simple setup you no longer have to leave the demonstration area to switch to a different set of speakers.
2 Inputs A & B: Connect your source material for convenient A/B comparison. 3 Remote Control jack: Connect the WPL-26 IR multi pin cable for remote control of the WPL-26. Place the receiver in a place where the transmitter can be easily be pointed at it.