With A Tether - Honda 2010 Civic Coupe Owner's Manual

09/07/07 13:56:41 31SVA640_050
Installing a Child Seat with a
Tether
TETHER ANCHORAGE POINTS
ANCHOR
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Using an Anchor
TETHER
STRAP
HOOK
Outer position
COVER
1. After properly securing the child
seat (see page
head restraint to its lowest
position, then route the tether
strap over the head restraint.
2. Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
Front
TETHER STRAP
HOOK
ANCHOR
Center position
3. Tighten the strap according to the
43 ), adjust the seat maker's instructions.
Installing a Child Seat
Front
ANCHOR
45